GIANT V5003 X-TRA

Wheel Loaders 2019

The GIANT V5003 X-TRA is characterized by a so-called P-kinematics – a lower front frame and thus a lower centre of gravity of the load in comparison with the machine, resulting in a significantly higher tipping load. An additional advantage is the driver’s excellent view on his/her work which improves work safety as well.

EXTRA FEATURES

  • Hitch: GIANT Standard (Hydraulically)
  • ROPS / FOPS safety roof, incl. safety doors left and right
  • Lifting arm with Z-kinematic
  • Double acting hydraulic valve at the front (mechanical)
  • Hydraulic servicebreak on 4 wheels
  • Floating position on lifting cylinder(s)
  • Luxury sprung seat with safety belt, armrest and extended backrest
  • Main switch
  • Towing hook at the back
  • 1 Counterweight integrated into the bumper
  • Working light on lifting arm
  • Cyclone filter
  • Oil cooler
Engine
Engine Kubota D1505-T (4 cylinder),
Engine power 50 hp / 36 kW
Fuel Diesel
Service weight - Measured with earthbucket 3,100 kg
Lifting capacity 2,900 kg
Tipping load - Measured on hinge point in straight position on standard tires 3,550 kg
Lifting height - Measured on hinge point in straight position on standard tires 2,658 mm
Length without bucket 3,690 mm
Width on standard tires 1,340 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with 12 tons axles. Planetairy end drive.
Control Drive back and forward through electrical switch
Differential lock 100% electrical differential lock on both axles
Driving hydraulics 78.4 ltr/min (460 bar)
Working hydraulics 56 ltr/min (215 bar)
Driving speed 0-10 km/h, 0-25 km/h (with automatic gear)
Parking brake Drum brakes
Colour GIANT yellow / GIANT grey / black
A Wheelbase 1,831 mm
B Total length (without bucket) 3,690 mm
C Total length (with bucket) 4,525 mm
D Length 3-point lifting arm 540 mm
E Min. height 3-point hitch 253 mm
F Max. height 3-point hitch 652 mm
G Seat top height 1,225 mm
H Max. height with ROPS/FOPS safetyroof 2,275 mm
I Max. height with ROPS/FOPS cabin 2,242 mm
J Height frontframe 1,680 mm
K Dumping height 1,800 mm
L Max. height pivot 2,658 mm
M Max. height with bucket 3,244 mm
N Rollback angle (on the ground) 41°
O Rollback angle at max. lifting height 44°
P Dumping angle (max.) 47°
Q Loading angle (max.) 30°
R Diameter standard tire ø850 mm
1A Maximum radius external 3,281 mm
1B Radius at the outer edge 2,859 mm
1C Inside turning radius 1,476 mm
1D Min. machine width 1,400 mm

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
PHONE:
01667 462 608
EMAIL:
Doug@

Message to FFE

Error: Contact form not found.