Farm & Forestry Equipment > Listings > Giant G5000 X-TRA

Wheel Loaders

Giant G5000 X-TRA full
Giant G5000 X-TRA full

Overview

The G5000 X-TRA is equipped with a lower front frame and specifically developed for extremely heavy work and work within the construction and earthmoving. The wheel loader is designed to operate in small spaces and in rough terrain. Not only the low weight and the compact dimensions ensure this, but the articulated pendulum joint gives the machines a small turning circle and makes them extremely manoeuvrable. This ensures that work can be done very accurate.

GIANT machines are a solid investment because of their reliability and high productivity. Only the best components have been chosen and tested extensively before they were applied to the G5000 series. TOBROCO-GIANT works closely with quality suppliers like Bosch Rexroth, Comer, Kubota and Hydac.

EXTRA FEATURES

  • Hitch: GIANT Standard (Hydraulically)
  • ROPS / FOPS safety roof, incl. safety doors left and right and rear window
  • Double acting hydraulic valve at the front (mechanical)
  • Hydraulic servicebreake on 4 wheels
  • Floating position on lifting cylinder(s)
  • Luxury sprung seat with safety belt, armrest and extended backrest
  • Main switch
  • Towing hook at the back
  • 1 Counterweight integrated into the bumper
  • Working light on lifting arm
  • Cyclone filter
  • Oil cooler

Technical

Engine
Engine Kubota V2403-CR-TE5B (4 cylinder), STAGE V
Engine power 75 HP / 55 kW
Fuel Diesel
Service weight - Measured with earthbucket 5,100 kg
Tipping load - Measured on hinge point in straight position on standard tires 4,695 kg
Lifting height, Measured on hinge point in straight position on standard tires 2,850 mm
Length without bucket 4,162 mm
Width on standard tires 1,460 mm
Driving mechanism Hydrostatic 4 wheel drive with automotive control with 16 tons axles. Heavy planetairy end drive.
Control Drive back and forward through electrical switch
Differential lock Axles with limited slip on both axles
Driving hydraulics 145 ltr/min (480 bar)
Working hydraulics 78 ltr/min (250 bar)
Driving speed 0-10 km/h, 0-20 km/h (with automatic gear) (higher driving speed of 35 km/h is optional)
Parking brake Hydraulic multidisc brake SAHR
Colour GIANT yellow / GIANT grey / black

Diagram

A Wheelbase 2,044 mm
B Total length (without bucket) 4,162 mm
C Total length (with bucket) 4,993 mm
G Seat top height 1,600 mm
H Max. height with ROPS/FOPS safetyroof 2,523 mm
I Max. height with ROPS/FOPS cabin 2,553 mm
J Height frontframe 1,772 mm
K Dumping height 1,919 mm
L Max. height pivot 2,850 mm
M Max. height with bucket 3,600 mm
N Rollback angle (on the ground) 45°
O Rollback angle at max. lifting height 43°
P Dumping angle (max.) 46°
Q Loading angle (max.) 29°
R Diameter standard tire ø1050 mm
1A Maximum radius external 3,589 mm
1B Radius at the outer edge 3,190 mm
1C Inside turning radius 1,745 mm
1D Min. machine width 1,460 mm

Attachments

TOBROCO-GIANT offers more than 100 different attachments so your machine can be used all year long. By choosing the right attachment it is possible to adjust your GIANT to working conditions for agricultural purposes, construction, material handling, private use and many other areas of application. Clear every job with one machine!

Contact

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
PHONE:
01667 462 608
EMAIL:
Doug@

Message to FFE

Error: Contact form not found.

Compare