Logic – Tractor Mounted Weed Wiper – CTM600 (Grassland Application)

Contact 2000 2020

The Logic Tractor Mounted Weed Wiper CTM600W – Contact 2000 is the flagship of our tractor mounted weedwiper range and is the most advanced and efficient weed wiper (weed licker) system available. All CTM models have been designed for mounting on a tractor’s three point linkage whilst the chemical supply pump is powered by the tractor’s 12v electrics. The CTM600 has a 6 metre working width and a 270 litre on board chemical tank offering work rates of between 13 acres (5Ha) and 20 acres (8Ha) per hour, depending on forward speed and terrain.

The Logic CTM600W consists of a hydraulic function selector to move the outer brush units to the working position and to power the brush sections. During operation, the grassland model runs on its four wheels and floats over the ground when the hydraulics are put into “float” mode – this ensures the 6 metre boom follows the contours of the ground which is critical when working on rough or undulatiing ground. The two outer wings incorporate a resettable, hydraulic break-back facility to protect the machine against damage from unforeseen obstacles.

The unique, contra-rotating brush ensures that each weed plant is liberally coated with chemical, ensuring rapid and effective weed control while at the same time eliminating chemical wastage and leaving untargeted plants, such as valuable grass and clover or arable row crop, untouched. Huge chemical savings can be achieved using Contact 2000 compared with conventional blanket spraying along with other additional environmental benefits.

The 12v electric pump supplies the chemical at a controlled rate via the (in-cab) control unit ensuring the correct saturation of chemical on the brush, depending on weed density – the override button can be used at any point to supply extra chemical to the brush for treating more dense area of weeds. With the height set correctly to target just the weed plants which require treatment, the unit is simply switched on to start the brush rotating and the unit is moved across the area needing treatment. An optional bout marker is available to provide a visual indicator of the area covered.

The Contact 2000 system ensures effective measures can be taken against many common weed species (e.g. rush, bracken, thistle, dock, nettles, weed beet, blackgrass, fat hen and volunteer plants, etc).

Contact 2000 is suitable for use with many Environmental/Stewardship schemes.

Standard Features – 

  • CTM600W – fully hydraulic 6 metre working width
  • Contact 2000 contra-rotating chemical brush
  • In-cab controls for all operations including chemical application
  • 270 litre on-board chemical tank. 9 litre/minute pump (at working pressure)
  • Category 2 and 3 linkage
  • Two rear LED lights incorporating side, brake and indicator
  • Transport dimensions: 2.5m (l) x 2.4m (w) x 2.9m (h)
  • Working dimensions: 2.5m (l) x 6.4m (w) x 1.5m (h)
  • Brush wiping height for use on grassland 400mm max down to 50mm min
  • Unladen weight 950kg: laden weight 1220kg (including 270 litres chemical mixture)
  • Recommended tractor 100hp+. Hydraulic flow requirement 50litres/minute
  • Requires 2 x double actuating hydraulic valves
  • Lifting brackets incorporated into main frame to allow machine to be safely lifted on telehandler/fork lift tines

Options – 

  • Bout marker
  • CTM600 cereals model – without wheels, for use in crops such as sugar beet, oil seed rape, vegetable crops, etc.
  • CTM250 2.5 metre 3 point linkage model and power arm model  plus trailed CTF range.

Applications – 

  • The Contact 2000 system ensures effective measures can be taken against many common weed species (e.g. rush, bracken, thistle, dock, nettles, weed beet, blackgrass, fat hen and volunteer plants, etc).

    Contact 2000 is suitable for use with many Environmental/Stewardship schemes

Contact Information

44 Stuart St. Ardersier, Inverness-Shire IV2 7RS
PHONE:
01667 462 608
EMAIL:
Doug@

Message to FFE

Error: Contact form not found.